HPE Aruba Network Campus Access Associate (HPE6-A85) Certification Sample Questions

Getting knowledge of the Hewlett Packard Enterprise HPE6-A85 exam structure and question format is vital in preparing for the HPE Network Campus Access Associate certification exam. Our HPE Aruba Network Campus Access Associate sample questions offer you information regarding the question types and level of difficulty you will face in the real exam. The benefit of using these Hewlett Packard Enterprise HPE6-A85 sample questions is that you will get to check your preparation level or enhance your knowledge by learning the unknown questions. You will also get a clear idea of the exam environment and exam pattern you will face in the actual exam with the HPE Network Campus Access Associate Sample Practice Test. Therefore, solve the HPE ACA-CamAcss sample questions to stay one step forward in grabbing the HPE Aruba Networking Certified Associate - Campus Access credential.

These Hewlett Packard Enterprise HPE6-A85 sample questions are simple and basic questions similar to the actual HPE Aruba Network Campus Access Associate questions. If you want to evaluate your preparation level, we suggest taking our HPE Network Campus Access Associate Premium Practice Test. You might face difficulties while solving the real-exam-like questions. But, you can work hard and build your confidence on the syllabus topics through unlimited practice attempts.

Hewlett Packard Enterprise HPE6-A85 Sample Questions:

01. Which statement is correct when comparing 5 GHz and 6 GHz channels with identical channel widths?
a) 5 GHz channels travel the same distances and provide different throughputs to clients compared to 6 GHz channels
b) 5 GHz channels travel different distances and provide different throughputs to clients compared to 6 GHz channels
c) 5 GHz channels travel the same distances and provide the same throughputs to clients compared to 6 GHz channels
d) 5 GHz channels travel different distances and provide the same throughputs to clients compared to 6 GHz channels

02. The customer has a requirement to create authorization policies for their users with Windows 10 clients, with a requirement Tor authorizing both device and user credentials within one Radius session. What would be the correct solution for the requirement?

a) ClearPass 6.9 with EAP-TTLS
b) ClearPass 6.9 with EAP-TLS
c) ClearPass 6.9 with PEAP
d) ClearPass 6.9 with EAP-TEAP

03. Make sure the interfaces are all ON. Which configuration script will achieve the task?
a) Edge1# conf t vlan 20 name Mgmt interface vlan 20 ip address 10.1.1.10/24 no shut interface lag 1 shut vlan access 20 lacp mode active Int 1/1/51.1/1/52 shut no routing lag 1 interface lag 1 no shut
b) Edge1# conf t vlan 20 name Mgmt interface vlan 20 ip address 10 1.1 10/24 no shut interface 1/1/51.1/1/52 shut vlan trunk native 20 vlan trunk allowed all lag 1 lacp mode active interface 1/1/51.1/1/52 no shut
c) Edge1# conf t vlan 20 name Mgmt interface vlan 20 ip address 10 1 1 10/24 no shut interface lag 1 shut vlan trunk native 20 vlan trunk allowed all lacp mode active Int 1/1/51.1/1/52 shut no routing lag 1 interface lag 1 no shut interface 1/1/51.1/1/52 no shut
d) conf t vlan 20 name Mgmt ip address 10 1 1.10/24 no shut interface lag 1 shut vlan trunk native 1 vlan trunk allowed all lacp mode active int 1/1/51.1/1/52 shut no routing interface lag 1 no shut interface 1/1/51.1/1/52 no shut

04. What are the main characteristics of the 6 GHz band?
a) In North America, the 6 GHz band offers more 80 MHz channels than there are 40 MHz channels in the 5 GHz band.
b) Less RF signal is absorb by objects in a 6 GHz WLAN.
c) The 6 GHz band is fully backward compatible with the existing bands.
d) Low Power Devices are allowed for indoor and outdoor usage.

05. When would you bond multiple 20MHz wide 802.11 channels?
a) To decrease the Signal to Noise Ratio (SNR)
b) To increase throughput between the client and AP
c) To provision highly available AP groups
d) To utilize high gain omni-directional antennas

06. Describe the functionality of ARP.
a) Clients do not have an ARP cache and always ask for the default gateway.
b) ARP maps MAC addresses to switch ports.
c) ARP maps layer-3 IP addresses to layer-2 MAC addresses.
d) ARP uses multicast to build the ARP table.

07. Where are wireless client roaming decisions made?
a) Joint decision made by the origination and destination APs
b) Client device
c) Virtual Controller
d) Aruba Central

08. A customer has just implemented user and device certificates via a company-wide Group Based Policy (GPO) Which EAP method requires client certificates when authenticating to the network?
a) EAP-TTLS
b) EAP-TEAP
c) PEAP
d) EAP-TLS

09. You need to troubleshoot an Aruba CX 6200 4-node VSF stack switch that fails to boot correctly Select the option that allows you to access the switch and see the boot options available for OS images and ServiceOS.
a) Member 2 RJ-45 console port
b) Member 2 switch mgmt port
c) Conductor USB-C console port
d) Conductor mgmt port using SSH

10. Based on the "snow ip route" output on an AruDaCX 8400. what type of route is "10.1 20 0/24, vrf default via 10.1.12.2. [1/0]"?
a) static
b) local
c) OSPF
d) connected

Answers:

Question: 01 Answer: b	Question: 02 Answer: d	Question: 03 Answer: c	Question: 04 Answer: a	Question: 05 Answer: b
Question: 06 Answer: c	Question: 07 Answer: b	Question: 08 Answer: d	Question: 09 Answer: c	Question: 10 Answer: a

Note: For any error in HPE Network Campus Access Associate (HPE6-A85) certification exam sample questions, please update us by writing an email on feedback@certfun.com.