Huawei HCIP-Access (H35-211) Certification Sample Questions

01. Which command is required to configure the chassis connection in the UA5000 chassis of the high-density PVM master?
a) frame connect
b) frame link
c) link add
d) frame add

02. Regarding the functions of the MA5680T SCUN and SCUL boards, which of the following descriptions is wrong?
a) is the system control management unit of MA5680T
b) Support load sharing function
c) Support active/standby switchover
d) Support local and remote maintenance

03. What are the reasons that may cause the PC to dial the Internet 678 error?
a) PADI message did not arrive at BRAS
b) BRAS sends PADO packets to discard
c) Radius authentication does not pass
d) DNS parsing error

04. HSI service uses VLAM tags to bind users precisely, if there are 5K FTTH hanging under the LT Users, which VLAN switching scheme is recommended?
a) C>S+C
b) S+C>S+C
c) c>S
d) User VLAN->C’VLAN->S+CVLAN

05. When you configure the HUAWEI NETWORK MANAGEMENT U2000 for FTTH IPTV service access, which of the following templates needs to be configured?
a) SNMP template
b) MGC template
c) IGMP template
d) Value-added business templates

06. The correct multicast MAC address corresponding to the multicast IP address 227.120.1.32 is?
a) 01-00-5e-78-01-32
b) 01-00-5e-14-01-20
c) 01-00-5e-78-01-20
d) 01-00-5e-14-01-32

07. Which of the following commands in the H.248 protocol can be sent by the MG or MGC?
a) Notify
b) ADD
c) MODIFY
d) ServiceChange

08. Data configuration on the OLT. When adding a Gemport, you usually choose the type of service carried by Gemport. Which of the following business types does gemport support?
a) ETH
b) POTs
c) TDM
d) E1

09. When deploying home and guest services in a PON system, which of the following services has the highest priority?
a) VOIP
b) GAME
c) INTERNET
d) IPTV

10. In a GPON network, multiple traffic flows can be configured under one gemport. Which of the following statements is incorrect?
a) According to the Ethertype service flow, a service flow with SPPPoE (EtherType = 8863/8864) and IPoE (EtherType !=8863/8364) can be configured under a gemport.
b) Different services are classified by VLAN. In a gemport, eight different service flows can be configured according to the user vlan: according to the user vlan, it is divided into: untagged, uservlan, priority tagged, other-all.
c) Different services are classified according to 802.1p. In a gemport, eight different service flows can be configured according to the vlan+ priority of the user.
d) Different services are classified by port. Different gemports can be configured with different service flows according to different user ports.